Build Solar Panel Yourself

Thinking about changing your house to a solar system? Good choice! A decision to go to a renewable energy source is the first step, and there is a large, but now you have to learn how to build solar power for your own personal use. Let me explain the broad strokes, and do not worry, it’s not really so difficult … provided you have the right information. Get Best Make Solar Panel and Make Wind Turbine Guide

Before you begin, decide your project to meet your individual goals in terms of solar energy. Do you want to run a few appliances and reduce your electric bill or you want to remove it completely through the creation of an autonomous solar power system at home? Different objectives require different levels of commitment and your costs will vary depending on what you hope to do. Find out your goals and then you can plan exactly what you need to do to achieve them.

How to Build Solar Power Step # 1

Material:

The first things you need are a parts list and the right materials. You can head over to your local DIY store to buy everything. All points which are to build a solar power system to readily available and inexpensive. Most likely you will already many of the tools that you will be at home, but when you can not them it’s a good bet you know about. Before the transfer of money, have sack around your garage, shed or basement, you can already some of the materials at hand.

The good news is, you can do everything you need for under $ 200 and since you are going to do the work itself will not buy expensive labor costs.

How to Build Solar Power Step # 2

The Build:

The solar cells are the small motors that come together to create the power. Link these together create a solar panel, and you have the most important component of your solar system. You can buy solar cells or at home. You can consider in large quantities for very little about the various online auction sites.

Tip: If you are sure not to buy cells that they tabbed, it will eliminate a lot of trouble.

If your cells connected to each other, they work together as a team to produce electricity. You will have to do some soldering, but it is not difficult to get the hang of. Make sure that all cells have the same size as your solar system are limited by the smallest cell in the group.

Next you have in common a field that included at your solar panel. Make sure if you are the plates not jammed against the sides of the box office. The plates can grow and shrink, depending on the weather so that you avoid cracks with this small but necessary step. Before your plates, line the base of the box with a non-conductive material. Something like pegboard should now work all right. When attaching your plates, glue each cell in the middle with silicone to seal it once more to prevent this cracking, the cells should extend or contract.

Now you have put plexiglass on the outside the box you built. This material is occurring in the elements and allows the sun’s energy to penetrate into your panel.

Note: Pre-drill holes in the plexiglass before screwing it on the field. It will probably be nothing more than crack.

How to Build Solar Power Step # 3

Installation:

Since you have completed building, you need to connect the solar panels to charge controller in combination, and then to a battery bank. The battery bank is to convert a converter connected to the D / C electricity generated by your panel A / C, which is used by most household appliances.

Note: Before installing, the test everything works as it should.

These are the basic steps, like building solar power for your home, of course, the process is more complex in terms of the individual steps, but with some good step-by-step instructions, you’ll be energy independent in no time. Get Best Make Solar Panel and Make Wind Turbine Guide