How can I Use Solar Power in my Home?

If you are looking for a way to lower your energy bills each month, a solar power home kit might be the answer. If you want to reduce the amount of money you pay on your electric bills then recent advances in solar panel design has made this technology an effective method to do so. If you install a solar system you will reduce, and sometimes eliminate altogether, your need for utility company supplied electricity.

Making your own solar and wind power for less than $200

Solar systems are simple to set up and are offered in a wide variety of different configurations. You will need an electrician to connect the system to your home’s power lines, but everything else can be done by you. The reason you need to bring in an electrician is that there are specific codes that the installation needs to adhere to in order to be approved, and a licensed electrician will be able to accomplish this for you.

You need to find your home’s power needs before you purchase a solar power system. By looking at previous electricity bills you will be able to achieve this. You need to try to settle on an average power usage for the year as well as a peak usage.

This will allow you to decide on which sized system is right for you. Most new solar power installations will allow you to get a basic setup going with only a couple of panels and then have the option of adding more at a later date. If you want to spread the cost of building the system out over a period of time this can be a good way of doing so.

The two important parts of a solar system is the solar panel and the power inverter. A rail system will hold the solar panels secure, and keep them a few inches up off the surface of the roof. This will let the rain and other debris move underneath the panels, and also give proper ventilation. To ensure that they are secure as possible you should anchor the rails to the roof joists. The panels will need to be supported properly because even though modern panels are lighter than previous models, they still can be quite heavy.

Making your own solar and wind power for less than $200

After the solar panels are assembled and in place you can run the cables down to the spot where the inverter will be located. The inverter will switch the currency from DC, which the solar panels produce, to AC, which is the format that all homes run with. There are two types of inverters, exterior and interior.

If you are using the exterior type of inverter you will run the cables to the spot that the inverter will be located. If you are going to use an interior inverter you may need to have an electrician route the cables because certain electrical codes must be followed. Once the cables are run, the inverter needs to be mounted and wired into the panels and your homes electrical system.

This should be done by a licensed electrician who is familiar with solar power home systems. Once your installation is finished you will have years of dramatically reduced energy bills to look forward to.

Making your own solar and wind power for less than $200

The Benefits of Solar Power For Us All

The sun produces massive amounts of heat that are transmitted down to the earth’s surface. When the sun’s rays reach the earth’s surface the intensity of the heat directly from the sun is not as hot because some of the heat is rerouted before it reaches the earth’s atmosphere. When the sun is hot and it is summer time we think that it couldn’t get much hotter as the mid day sun makes your run for shade, but it can get hotter if it wasn’t rerouted.

Solar power can be hot enough to power machinery and that is exactly what was discovered over one hundred years ago when a man working on machinery wondered if steam from the heat of the day could be used to power machinery. He was right and thus began a new form of production, heat and electricity. Today solar power is being used all around the world. The solar power is being concentrated into a solar source where the heat is used in a variety of ways. We still rely on our way of heating and powering our homes but in the future it may all be powered by the sun. It is cost effective to use solar power as the only expense you have is in your solar source.

In order to use solar power you will need to have something that can attract the sun and allow the heat to be concentrated where it can stay warm for a long period of time. This is fairly easy when you consider all the knowledge and resources that we already have access to. When you use solar power for heating and power electricity you cannot go wrong.

Solar power is entrusted in space shuttles as they know that this will help produce the most efficient energy with the least amount of complications. The solar panels are faced toward the sun at all times in order to be able to power the shuttle efficiently. There are fewer problems from solar power than with other methods. Even though there are days that there are clouds in the sky and rain, snow or other weather, it is still possible to produce enough heat in your solar source to create enough energy to last until the sun can come back down. Solar power is in our future we need to be ready for it. Right now solar power is only being used by those who are more aware and worried about our earth’s atmosphere when it is a concern that we should all be worried about.

We can learn a lot from the past and the way that solar power was used. Every minute of the sunlight was used doing everything that needed done because after the sun went down there was no more light. I don’t think we could do that now. Solar power has so many benefits for us that we don’t realize all of them and how it is more efficient to use the solar power than other ways.

“make Solar Power Electric” System © – it Works. Period!

Having an independent power-supply doesn’t have to be that expensive or complicated task anymore, simply because “Make Solar Power Electric” System enable you to do that at minimal cost and effort. The first impression may not reveal that, but this technique can be implemented quite easily by any novice user. Follow this report in order to know more why any of us should use it a.s.a.p.

Some basics

If you want to have such “Make Solar Power Electric” System all you need to do is following one of these ‘secret’ guides available on the Web that can teach you how to professionally assemble Solar-Panels. It may sound obvious, but be sure to choose the right guide; make sure it provides clear information including videos, diagrams, and support. Well, here are some key-advantages and tips that can help you to know a little more about this topic.

Main advantages

Finally, when looking for the bottom-line, we easily identify the following benefits:

* Enables us to get an extra income by quickly providing such sys. for others.
* It is now amazingly affordable like never before.
* It is portable and you can take it with you (camping for example).
* Requires no more than a weekend to be installed.
* Made of simple parts/tools found at any local hardware store.

Tip

Use high quality materials – you want your unit to hold for many years ahead, don’t try to save a few dollars here and there and after a few months watch how everything falls apart.

On the bottom line

The reason that turned it extremely effective is the fact that “Make Solar Power Electric” System enables any household to successfully ‘cut’ on their elect. expenses by 80%, at minimal costs, and with excellent results. If we go a little further, it wouldn’t be that hard to discover other benefits provided by this special invention, simply because it is about to change the entire industry forever. Now that we understand how it works the best tip would be to test it as this is the most recommended way that truly enables you to explore the advantages mentioned in this article.

Solar Power – The Vehicle Of The Future

In a world seemingly obsessed with finding renewable energy sources, solar power has become a common feature in day-to-day life. Although the technology was initially released before it was fully tested, and therefore gained a poor reputation for reliability, since the turn of the Millennium it has grown in stature and promise. One can forgive the scientists behind the development for this over-eagerness in releasing what could one day be a primary resource for fuel and power in the modern world, especially as the majority of the kinks are now ironed out.

 

It is therefore natural that many are considering the possibility of solar powered vehicles. With the non-renewable fossil fuels being consumed by motorists at a rate that the planet will soon no longer be able to supply, the idea of having a car entirely powered by solar powers is an intriguing one.

 

It is not, however, a particularly new one. Almost since the invention of solar panels, pioneering developers have been trying to find a way to harness the technology for the car. The idea of being able to run a car with no emissions and no consumption of fossil fuels would indeed be arguably the biggest leap in engineering since the Wright brothers, but is it really possible?

 

The steps are beginning to be made. For example, Toyota – who market the worlds most popular hybrid vehicle, the Prius – are said to be considered installing solar panels on new versions of the Prius. However, the panels will only be used to power the air conditioning and electrical systems. While this is advancement in the general concept, it isn\’t the finished article.

 

In truth, solar powered cars do exist. Powering a vehicle by the force of the sun alone is possible, but the problems arise in the practicalities. Two annual races currently exist for solar powered vehicles only, the World Solar Challenge and North American Solar Challenge. However, many of the competitors are engineering under and post graduates, as well as technologically minded individuals. The notable absence in these races is in the big car manufacturers, the people who genuinely could make solar powered vehicles a reality for all.

 

The question is then, if a solar powered vehicle is possible, will it ever replace the standard combustion engine? The issue is open for debate, but it would seem unlikely. Toyota may have implemented the concept of solar panels to power electrics and air conditioning, but perhaps only after trying to power the entire vehicle with solar energy and failing.

 

The main flaw in solar powered vehicles is size. To get the most out of the suns rays, a lot of solar powers are needed, far more than can ever be fit onto an actual car. From the small space available, it is perfectly possible to generate the necessary power from the sun to power the electric engine of a car, but only for very short distances and in sunny conditions. The idea, it would seem, will remain a fun experiment for mechanical students, and the ever popular races will continue. However, under current ideas for solar vehicles, it is unlikely your family hatchback is going to come complete with solar panels any time in the future.

“best Solar Power Lights” System © – Easily Cut Your Expenses!

No doubt that “Best Solar Power Lights” System gains amazing popularity these days among many households, simply because what it offers is revolutionary and can instantly cut your expenses. Surprisingly (or not), this technique makes it possible for almost anyone – novice/professional to get it to work in just a few days. Sounds interesting? keep reading and discover more about how we can all benefit from it.

Some background

“Best Solar Power Lights” System requires a weekend of your time – by following one of these ‘proven-to-work’ guides you’ll understand how to assemble Solar-Panels on your own. Just like everything else in life, some guides deliver and some other don’t; check what others say about it, does it provide clear information, videos, illustrations etc.? This way or another, here are some key-advantages and tips that can help you to know a little more about this topic.

Quick benefits and advantages

This solution undoubtedly provides several key-benefits:

* No more power-interruptions.
* Increases the value of your home by thousands.
* Very quick return on investment (ROI).
* Helps our nation on becoming less dependent on external oil suppliers.
* Enables us to make a 220V-240V elec. sys.

Tip

Be aware that nowadays it is possible to get the paneling for free – most professional guides will show how to do that.

Summary

Using such powerful “Best Solar Power Lights” System is probably the easiest and most effective way to ‘cut’ one of the most irritating household expenses. It would be quite easy to find other great benefits provided by this one-of-a-kind ‘machine’, simply because it is innovative. By the end of this quick article the best advice would be to try it in order for you to enjoy the benefits that it offers.

Solar Power On The Go

In the early days of solar power there were huge installations necessary to make use of this energy source. The solar panels that were needed were larger than the average full grown man. This made the collection of solar power a bit of a challenge. Therefore making use of solar power was not suitable of everyone. It was expensive and a bit of a chore as well.

These huge solar panels still exist in solar power plants, which produce energy for certain parts of the world. But over the years technological advancements have made solar power affordable and portable enough so common people can use it for their everyday lives. Nowadays solar panels have become so small that pocket calculators use these as an alternative power source to the usual single cell batteries.

But the use of portable solar power did not stop with the use of pocket calculators. Numerous inventions have made use of portable solar power and some of these are available all over the world. Let’s take of look at 5 affordable uses of portable solar power.

1) BRUNTON BATTJACK Batteries and Chargers

The charger comes with the SolarPort 4.4, wall transformer and 12V car cord to charge batteries from AC or in a vehicle. The charger can hold 4 AA or AAA rechargeable batteries. The kit has 4 1500 mAh NiMH AA battery cells. The charger will switch to trickle charge when the batteries are fully charged. It also has a discharge option for maintaining NiCad batteries. This will cost $30.

Batteries are NiMH AA dry cells, have a 1500 mAh capacity, can recharge for hundreds of times, and come in a package of 4 AA batteries. These cost $14.

2) SS-PVSMALL Power System

This portable solar power system from Silicon Solar Inc is easy to use and needs no assembly. Included in each system is an inverter/battery carrying case and 8.5 or 17-watt solar panel/charge.

This system can power a laptop computer, portable audio devices, small coloured TV, and most devices that need less than 140 watts AC 110-120v, and 60Hz input. Power time can range from 30 minutes to 56 hours, depending on the equipment being powered up.

The system is also used for indoor/outdoor lighting, and is lightweight. The system also includes inverters, cables, battery box, and sealed gel cell battery. The system comes with a 1-year warranty. The system costs $149.95.

3) UNI-KIT

The Uni-Kit system is a portable, durable, solar powered lighting system that can provide extended lighting hours to its users. This is powerful enough to let even a 12-volt radio or TV operate, and easy to install. The Uni-Kit system also comes with a basic power controller that maximizes battery life of its 12-Volt Deep Cycle SLA Battery by controlling its charging and load use, and protects the system from overcharging and excessive discharging.
Uni-Kit can be used in the garage, tool sheds, remote homes, isolated buildings, surveying sites, construction sites, camp sites, and even during water pumping operations.
Uni-Kit comes with an 11-watt fluorescent lamp that has a 1-year warranty. The 15-watt solar panel has a 20 year warranty. You can add up to 4 lamps to increase the system’s illumination capacity. The default kit weighs 10 pounds and can be purchased for $249.95 from Silicon Solar Inc. If you have additional 4 lamps, all 4 will cost an extra $235.

4) BRUNTON Portable Solar Panels

Brunton has portable CIGS (copper indium gallium diselenide) solar array panels that are thin and lightweight to save weight for backpackers. These panels produce standard 12volts outputs, and come with basic 12V vehicle socket, 4 different jack plugs, and battery clips. Solar array panels come in a 6 and 12 foldable, and 14 roll able series. Prices of these panels range from $129 to $399.

5) EN-R-PAK AC/DC Backup Power Supply

The EN-R-PAK backup power supply 200 series are compact solar power backup supplies that have built-in electronics that store, control, and produce energy from the sun, wind, or flowing water. The system can accept additional solar panels, wind turbines, or water turbines. These power supply systems use renewable stored energy to produce 115 volts and 12 volts DC. A 230-volt unit is also available for international use.

The EN-R-PAK can provide emergency power for a home or office, remote areas, a cabin or cottage, for communications, wherever and whenever you need power! This system has no parts that wear out, is environment friendly, quiet, does not emit harmful fumes, easy to operate, requires no assembly, needs almost no maintenance, and is designed to survive rugged weather conditions. These can also power energy efficient lights, a laptop computer, a small TV, rechargeable power tools, and other electrical equipment.

The EN-R-PAK has a 1-year system warranty, 20-year solar panel warranty, 2-year battery warranty, and is built to conform to UL, NEC, and CSA electrical standards.

EN-R-PAK 50-watt solar panels are liquid-proof and shatter proof. These also come with a blocking diode, 30 feet of cable with a connection plug. Wind turbines are also configured to the EN-R-PAK so changes to the power centre are not needed.

The basic system will cost $1500. Additions to the system will make the cost reach a maximum of $2950.

This sums up the possibilities for portable solar power. As time and knowledge progress other devices and possibilities will be available on the market. The prices mentioned here can give you an idea, but are by no means accurate.

Residential Solar Panels Kit © – Cut Your Expenses Now!

Already spending hundreds month-by-month on these rising electricity-bills? It seems like a simple Residential Solar Panels Kit can easily save you all that trouble. Amazingly or not, this technique can be implemented quite easily by any novice user. If you read this article you’ll be able to learn more why any of us should use it a.s.a.p.

Quick overview

Thinking that making such Residential Solar Panels Kit is complicated? You should definitely check one of these popular guides that teach how to assemble Solar-Panels in just one weekend. It may sound obvious, but be sure to choose the right guide; make sure it uses simple english without being too much ‘techi’, also, does it offer video tutorials, illustrations, and tech support? Anyway, here are few key-benefits and & quick advices to help you better understand this topic.

Quick advantages

Implementing this exciting solution definitely provides many benefits:

* Knowing that we are doing our part to conserve the planet.
* Rely only on your own energy-resources and not the ones supplied by governments or corporations.
* It is already proven to work for thousands of people.
* One-time investment that lasts for life.
* Very quick return on investment (ROI).

Tip

Using a printed guidebook isn’t recommended – technology keeps changing and online guides usually get auto-updated with the latest information.

Article summary

Residential Solar Panels Kit truly brings outstanding results with a minimal investment on both time and cost. There are probably many other advantages provided by this exceptional ‘machine’, simply because it is highly-effective. It is advised to watch it in action so you could truly see how it can save your monthly budget.

What You Need to Know Before Installing Solar Panels

You’ve already heard that we may run out of fossil fuels in the next thirty years. That’s if the most rapidly growing nations in the world slow their ever-increasing use of our global resources at faster and faster rates. Alternative solar energy could be the answer to our energy problems. It’s free and it’s everywhere.

Making your own solar and wind power for less than $200

While alternative solar energy could be the answer to the world’s energy crisis, can you use solar solutions at home? Yes, you can. Maybe you have imagined solar power to be expensive and difficult to work with. It may shock you how little work it takes to put in and maintain a solar energy system. You’ll love to see how your power bill shrinks, but best of all, you’ll be making a difference for the future.  

Here’s how you can use alternative solar energy solutions at home.   

Solar water heaters came into popularity in Israel in the 1960’s. The Israeli government now mandates that all new homes be built with solar water heaters, making Israel the global leader in the use of solar water heaters. This saves Israel 2 million barrels of oil each year.  

At its most basic, the solar water heater consists of a collector and tank. The collector absorbs the rays of the sun. Most take the heat of the sun and transfer it to the water. Some collectors work to convert the light of the sun to heat, providing hot water in freezing temperatures.   

The heated water transfers to the tank, where it is stored hot until it is used. Some systems require a pumping mechanism to transfer the water to the household, while others just use gravity.   

Making your own solar and wind power for less than $200

While solar water heater can sometimes provide electricity, providing electricity is not the purpose of a solar water heater. To harness the rays of the sun and turn them into electricity, you need a different solar energy system.    Photovoltaic panels, often seen mounted on the roof of a building, take the light of the sun and turn it into direct current. The system then inverts the direct current to make it alternating current, which the appliances in your household can then use.   

What happens on cloudy days? Many systems do more than just capture and convert the energy; they store it too. Solar electricity systems frequently include batteries, which store the energy caught by the system but not immediately used.   

The future of photovoltaic products is looking good. Low profile, smart looking panels are coming onto the market. Soon we will even see photovoltaic materials incorporated into house paint, windows and, already on the market, roof tiles.   

Many people find the initial investment in solar energy products to be prohibitive. As technology continues to improve, the cost of purchasing and installing solar energy systems continues to decline. Is it possible that you could kiss your electric bill goodbye?   

It only takes three to four years to see a return on your investment in many alternative solar energy systems. After the payback period, you no longer have an electric bill, your system works at no cost to you. In addition, you know you are doing your part to salvage global resources.

Making your own solar and wind power for less than $200

Build Your Own Electric Solar Panel For A Better World

 

The sun produces enough energy in one hour to meet the electrical needs of the entire population on earth. Yet we only use a very small percentage of its power potential.

Home Solar Panel Kits

Solar panels and solar power are derived from sun light and are what we now refer to as green technology. In the past, solar power has been very expensive to produce and information on DIY solar power kits was virtually non existent.

Previously, solar panel kits could reach prices as high as $2500 to $5000, but they are now available for about $250 to $300. One of the main reasons for the high prices in the past was the general lack of information available to the public. With the advent of the Internet, people can now purchase informative booklets on solar energy, solar power and solar panels. People can now see online what a solar panel looks like right on their own computer. All of the information that you would ever need about solar panels is available on the Internet for purchase.

Materials To Build A Solar Panel

A purchased solar panel DIY installation kit will generally come with the solar panel installation manual, as well as all of the wiring needed for electrical connections. Solder and solder gun, all poles needed for many locational assemblies, all brackets, screws and bolts needed for your project will usually be provided. The manuals for solar panel building and installation are written in easy-to-use language in order to be as user friendly as possible.

Do Homemade Solar Panels Work?

Converting solar power to electric energy can be done through the use of solar panels and a solar converter that will convert direct current into alternating current, making it usable in your home. You could conceivably go completely off of the power grid or remain on the grid and get paid by your local power provider for any extra power that you create by using your solar panels, selling the extra power to the electric company.

Small solar panels are very portable and can be used anywhere in the world. With a small solar panel you can power up your lap top computer, a hair dryer or even a small refrigerator. DIY kits for small solar panels are available online as well as at some of the bigger hardware stores. The manuals for DIY small solar panels are also available online.

Save Money By With Solar Panels

The average cost of a DIY solar panel kit is around $100. And if you need a professional installer, this should cost you about $300. Additionally, you can reduce your electric bill by 80% percent to 90 percent in as little as two weeks, and you can make a huge impact on the environment. The value of your house will increase by thousands of dollars, as green technology will be the way of the very near future.

<b>Do you want to learn how to build solar panels and cut your energy bill by 80 percent or more?</b>

To discover how to build your own solar panels in less than a day and start saving money on electricity, click here to visit the site now: <a rel=”nofollow” onclick=”javascript:_gaq.push([‘_trackPageview’, ‘/outgoing/article_exit_link’]);” href=”http://www.SolarPanelForHome.org/homesolarpower.html“>http://www.solarpanelforhome.org/homesolarpower.html”>http://www.SolarPanelForHome.org/homesolarpower.html</a>

How To Build Solar Panel: Steps 1-5

Once you have your equipment to build your solar panel, you are almost ready to get started. Building a solar panel can be a great way to get the whole family involved, and it can be more than a one man job, so before you begin to build a solar panel, why not ask the kids to help get the whole family involved in helping to save the environment and cut down on utility bills.

Now, before you begin building your solar panel, you need to determine what your solar panel is going to be used for. For instance, if you want to provide power for an electric fence then you might only need to build a 100 watt solar panel which will mean that you will pay out less, but if you are aiming to power your entire house with solar panels then you will need quite a bit more than 100 watts so first, decide what your solar panel is going to support and then it is time to build.

There are approximately 20 steps to building your first solar panel, and whether you are planning on making just one or many to power you whole house or more, then once you have built your first solar panel, you will have the guidelines to be able to created as many solar panels as you need.

Step #1: to begin, you will need a Multimeter which is able to measure DC fractions of voltage and your collection of solar cells, once you have this, position a light source near your solar cells as this will allow you to get a consistent measurement of voltage output of each of the solar cells.

Step #2: set your Multimeter to measure DC voltage and place the negative test lead on the side of the solar cell which shows negative voltage. Then place the positive test lead on the side f the solar cell which shows a positive voltage. Check to see what the maximum voltage output is and don’t move the solar cell around to try and get a higher reading. Next you need to separate your solar cells into groupings of .05 volt increments  and this will allow you to take maximum advantage of solar cell output.

Step #3: the next step is to connect the solar cells with tinned interconnection wire and in order to achieve this you will need to take the spool of interconnection wire and cut it into 10.5 inch lengths.

Step #4: next every piece of the tinned interconnection wire should have solder put on it and you can do this by adding solder to 5.25 inches of the wire beginning at one end, then flip the wire over and add solder to the remainder of the wire beginning at the opposite end.

Step #5: now you must solder a length of the interconnection wire to each connection strip which is located on the front of each of the solar cells.

« Previous Page — Next Page »